The lamp is powered directly by the battery of the pedal motor kit LIFT MTB, the consumption is about 0.30 Amper per hour at full power by mixing the mode we easily divide by two the consumption which allows to have about a consumption of 1 Amper per hour, because in practice we play on the 3 modes very easily and often to reduce consumption. Mode 1: 600 lumens / consumption 0.10Ah Mode2: 1200 lumens / consumption 0.20Ah Mode3: 2000 lumens / consumption 0.30Ah Cable between battery and adapter about 40cm to make a connection to the handlebar or helmet.

Lamp for electric bike is powered directly by the battery of the pedal motor kit LIFT MTB, 3 power mode.

Mode 1 : 600 lumens / consumption 0.10Ah

Mode2: 1200 lumens / consumption 0.20Ah

Mode3: 2000 lumens / consumption 0.30Ah

Handlebar mounting with elastic clamp compatible with all handlebar models 22.2mm / 25.4mm / 31.6mm / 35mm

Weight of the electric bicycle lamp 90grams)

Body is made of aluminum with fins to ensure good cooling.

Dimensions of the lamp are 60 mm wide, 40 mm high and 48 mm deep.

59,00€

In stock (can be backordered)

MADE IN FRANCE – 100% French manufacturing

SECURE PAYMENT

CB, bank transfer or check

2 YEARS WARRANTY

By our after-sales service

DELIVERY – Delivery in relay point or at home in most of the countries of the World.

The attachment of the electric bike lamp is done with small thick elastic bands specially designed to last over time, there are two to fit oversize handlebars 31.8 or 35mm and a second for the classic size 22.2 and 25.4.

The lamp for electric bike lift-mtb is fixed in 1 minute maximum and without any tools, once in place thanks to the small rubber buffer the lamp does not move in use but can be adjusted anyway.

Note that it is possible by adapting the lamp on the visor of a helmet (some prefer…).

Thanks to some Rilsan collar and a little patience, in 5 to 10 minutes the first time we install the lamp on the visor.

there is also a thread under the body of the lamp that can remove the round handlebar mount and have a flat surface with a thread to fix the lamp firmly on the support of your choice (many of us have an old helmet at home that could be dedicated to this …).

the light weight of the lamp (90 grams) makes that it is absolutely not felt that it is on the handlebar as on the helmet

The electric bicycle lamp has an aluminum body with fins to ensure proper cooling. The dimensions of the lamp are 60 millimeters wide, 40mm high and 48mm deep, which is the size of a small pack of matches…

Even if it is not recommended to overexpose theelectricbike light to water, it is waterproof to the few drops that could reach it at random during a ride and obviously to dust…