Chain guide for LIFT-MTB kit

chaine guide for electric Mountain Bikes (MTB).

Use and interest of the chaine guide for electric Mountain Bikes (E-MTB)?

If you don’t have a chain guide on your bike and you don’t have any problems with derailment. It will probably be the same with the kit, so no need to invest in a chain guide in this case.

Please note that we sell our kits with Narrow Wide Race Face system trays. This technology has been used on newer bikes since about 2013 and can do away with the need for anti-skid in most cases.

The Narrow wide Race Face system is a patented technology in the shape of the teeth of the chainring. This allows to limit considerably the derailment, especially if this type of chainring is coupled to a Sadow (Shimano) or type 2 (Sram) derailleur.

Here is a very interesting article on the subject: http: //www.26in.fr/news/28341-test-race-face-narrow-wide-34t.html

We sell a top chaine guide that can be fixed on LIFT-MTB support.

It is composed of two aluminum parts to have an optimal adjustment possibility.

You can also add a lower part like CGUIDE if needed.

If you have an additional chaine guide mount on your frame.

There are a number of other possible attachments other than the ISCG for an anti-derailment system: on a collar, TYPE E, DIRECT MOUNT, on the bases.

In which case you can use a different standard anti-derailleur from the ISCG mount from E13, MRP, CGUIDE, it is also a simple and effective solution.

If you have a front derailleur

Note that if your bike has a front derailleur, it is sometimes possible to keep it and leave it in a fixed position to guide the chain as on the picture.

Anti derailment for the internal turntable version:

On the internal version of our kit the motor mount guides the chain more naturally, so no need for a specific chain guide.

The kit is delivered with a small guide pin for this purpose, as shown on the picture.

It is adjustable for a secondary plate of 30 to 40 teeth.